Publications

A. Dal Pozzo, G. Antonioni, V. Cozzani, A methodology for the optimization of multi-stage abatement of acid pollutants in waste-to-energy plants, in: Proceedings of the 42nd Meeting of the Italian Section of The Combustion Institute, Napoli, Associazione Sezione Italiana del Combustion Institute, 2019, pp. III3 - III3 (atti di: 42nd Meeting of the Italian Section of The Combustion Institute, Ravenna, Italia, 9-11 settembre 2019) [Contribution to conference proceedings]

Alessandro Dal Pozzo, Giacomo Antonioni, Valerio Cozzani, Optimization of multi-stage air pollution control systems in WtE plants via process data analysis and dedicated test runs, in: 4th MatER Meeting - Innovations & Technologies in Waste Recovery, 2019, pp. 60 - 63 (atti di: 4th MatER Meeting, Piacenza, Italia, 27-29 maggio 2019) [Abstract]

Oguzcan S.; Tugnoli A.; Dvarioniene J., Application of selected life cycle occupational safety methods to the case of electricity production from pyro-oil, «ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL», 2019, 26, pp. 34873 - 34883 [Scientific article]

Oguzcan S.; Dvarioniene J.; Tugnoli A.; Kruopiene J., Environmental impact assessment model for substitution of hazardous substances by using life cycle approach, «ENVIRONMENTAL POLLUTION», 2019, 254, pp. 112945 - 112955 [Scientific article]

Oguzcan, S; Tugnoli, A; Kliaugaite, D; Dvarioniene, J, HARMONIZED INTERNET SYSTEM FOR LIFE CYCLE ASSESSMENT: EXPERT SYSTEMS APPROACH, «ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL», 2019, 18, pp. 1279 - 1288 [Scientific article]

Caputo P.; Loise V.; Crispini A.; Sangiorgi C.; Scarpelli F.; Oliviero Rossi C., The efficiency of bitumen rejuvenator investigated through Powder X-ray Diffraction (PXRD) analysis and T 2 -NMR spectroscopy, «COLLOIDS AND SURFACES. A, PHYSICOCHEMICAL AND ENGINEERING ASPECTS», 2019, 571, pp. 50 - 54 [Scientific article]

Rossi C.O.; Caputo P.; Loise V.; Ashimova S.; Teltayev B.; Sangiorgi C., A new green rejuvenator: Evaluation of structural changes of aged and recycled bitumens by means of rheology and NMR, in: Lily D. Poulikakos, Augusto Cannone Falchetto, Michael P. Wistuba, Bernhard Hofko, Laurent Porot, Hervé Di Benedetto, RILEM Bookseries, Springer Netherlands, «RILEM BOOKSERIES», 2019, 20, pp. 177 - 182 (atti di: RILEM 252-CMB Symposium, Braunschweig, Germany, September 17-18, 2018) [Contribution to conference proceedings]

Alessandro Dal Pozzo, Giacomo Antonioni, Valerio Cozzani, Acid gas removal in waste-to-energy plants via high temperature reaction with calcined dolomite, in: ECCE12 - Book of Abstract, 2019, pp. 20 - 21 (atti di: ECCE12 - 12th European Congress of Chemical Engineering, Firenze, Italia, 15-19 settembre 2019) [Abstract]

Alessandro Dal Pozzo, Margarita Rekhtina, Andaç Armutlulu, Paula M. Abdala, Christoph R. Müller, Valerio Cozzani, Molten salt promoters for the enhancement of CO2 capture by MgO-based sorbents: factors determining carbonation kinetics and sorbent deactivation, in: Convegno GRICU 2019, 2019, pp. 1 - 1 (atti di: Convegno GRICU 2019, Palermo, Italia, 30 giugno - 3 luglio 2019) [Abstract]

Alessandro Dal Pozzo; Alessandro Tugnoli, Process modelling-supported LCA: flue gas cleaning of a waste-to-energy plant, in: Il Life Cycle Thinking a supporto delle strategie di mitigazione e adattamento ai cambiamenti climatici - Atti del XIII Convegno della Rete Italiana LCA, Roma, ENEA, 2019, pp. 52 - 59 (atti di: XIII Convegno della Rete Italiana LCA, Roma, Italia, 13-14 giugno 2019) [Contribution to conference proceedings]

Baraccani S.; Piccolo A.; Gasparini G.; Palermo M.; Trombetti T., An assessment of the structural behaviour of the Garisenda tower in Bologna through finite element modelling and structural health monitoring, in: COMPDYN Proceedings, National Technical University of Athens, 2019, 3, pp. 5416 - 5422 (atti di: 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, COMPDYN 2019, grc, 2019) [Contribution to conference proceedings]

Baraccani S.; Dan G.; Di Tommaso A.; Trombetti T., Reducing seismic out of plane vulnerability of masonry church façades through optimization of capacity spectrum by tie rods, in: Key Engineering Materials, Trans Tech Publications Ltd, «KEY ENGINEERING MATERIALS», 2019, 817, pp. 325 - 333 (atti di: 6th International Conference on Mechanics of Masonry Structures Strengthened with Composite Materials, MuRiCo6 2019, ita, 2019) [Contribution to conference proceedings]

Franci F., Trevisiol F., Bitelli G., Sentinel 1 data for fuel spill detection. The case of the ships collision near Corsica, in: The role of Copernicus Sentinel data in knowledge processes and land management: state of the art of technology transfer to the operational sector, ENEA - Agenzia nazionale per le nuove tecnologie, l'energia e lo sviluppo economico sostenibile, 2019, pp. 13 - 17 (atti di: 12° Themed Remote Sensing Workshop, Bologna, 25/06/2019 - 26/06/2019) [Contribution to conference proceedings]

Francolini C., Bitelli G., Borghi B., Galletti F., High-resolution 3D surveying in support of cultural heritage, in: Proceedings 2019 IMEKO TC-4 International Conference on Metrology for Archaeology and Cultural Heritage, IMEKO, 2019, pp. 277 - 281 (atti di: 2019 IMEKO TC-4 International Conference on Metrology for Archaeology and Cultural Heritage, Firenze, December 4-6 dicembre 2019) [Contribution to conference proceedings]

Piergiorgio Tataranni; Cesare Sangiorgi, SYNTHETIC AGGREGATES FOR THE PRODUCTION OF INNOVATIVE LOW IMPACT POROUS LAYERS FOR URBAN PAVEMENTS, in: International Conference on Smart Cities, 2019, pp. 1 - 6 (atti di: ICSC2019 - International Conference on Smart Cities 2019, Seoul, Korea, July 17 – 19, 2019) [Contribution to conference proceedings]

Piergiorgio Tataranni; Cesare Sangiorgi, EXPERIMENTAL APPLICATION OF SYNTHETIC LIGHTWEIGHT AGGREGATES FOR THE PRODUCTION OF SPECIAL ASPHALT CONCRETES, in: International Conference on Sustainable Materials, Systems and Structures (SMSS2019), 2019, pp. 108 - 115 (atti di: International Conference on Sustainable Materials, Systems and Structures (SMSS 2019), Rovinj, Croatia, 20-22 March 2019) [Contribution to conference proceedings]

Nicholas Fantuzzi; Patrizia Trovalusci, Homogenized micro-structured composites as anisotropic micropolar continua, in: 22nd International Conference on Composite Structures (ICCS22) – Wuhan, China, 31 October-3 November 2019, 2019, pp. 1 - 1 (atti di: 22nd International Conference on Composite Structures (ICCS22), Wuhan, China, 31 October-3 November 2019) [Contribution to conference proceedings]

Nicholas Fantuzzi; Patrizia Trovalusci, Multiscale analysis of materials with anisotropic microstructure as micropolar continua, in: XXIV Convegno Italiano dell’Associazione Italiana di Meccanica Teorica e Applicata (AIMETA2019) - Roma, Italy, 15-19 September 2019, 2019, pp. 1 - 1 (atti di: XXIV Convegno Italiano dell’Associazione Italiana di Meccanica Teorica e Applicata (AIMETA2019), Roma, Italy, 15-19 September 2019) [Abstract]

D. Tornatore, E. Panettieri, S. Guerard, M. Montemurro, N. Fantuzzi, Damping capability of lattice structures: a numerical study, in: 5th International Conference on Mechanics of Composites (MECHCOMP5) – Lisbon, Portugal, 1-4 July 2019, 2019, pp. 1 - 1 (atti di: 5th International Conference on Mechanics of Composites (MECHCOMP5), Lisbon, Portugal, 1-4 July 2019) [Contribution to conference proceedings]

S. Babamohammadi, N. Fantuzzi, G. Lonardi, Mechanical characterization and analysis of FRP pultruded beams, in: 5th International Conference on Mechanics of Composites (MECHCOMP5) – Lisbon, Portugal, 1-4 July 2019, 2019, pp. 1 - 1 (atti di: 5th International Conference on Mechanics of Composites (MECHCOMP5), Lisbon, Portugal, 1-4 July 2019) [Contribution to conference proceedings]