Publications

The Department of Civil, Chemical, Environmental and Materials Engineering (DICAM) is committed to promoting advanced research and pursuing scientific excellence at international, national and regional levels.

As evidence of this commitment and of our scientific productivity, the Department produced 1397 research products between 2022 and 2024. The quality of scientific production is a key objective, with efforts to further improve high impact publications.

The full list of scientific publications produced by the Department can be found below.

Clear search box

Open Access

10525 publications

Casadei R.; Venturi D.; Giacinti Baschetti M.; Giorgini L.; Maccaferri E.; Ligi S., Polyvinylamine membranes containing graphene-based nanofillers for carbon capture applications, «MEMBRANES», 2019, 9, pp. 1 - 20 [Scientific article] Open Access
Shustikova I.; Domeneghetti A.; Neal J.C.; Bates P.; Castellarin A., Comparing 2D capabilities of HEC-RAS and LISFLOOD-FP on complex topography, «HYDROLOGICAL SCIENCES JOURNAL», 2019, 64, pp. 1769 - 1782 [Scientific article] Open Access
Macini, Paolo; Mesini, Ezio, La fortuna del petrolio di Montegibbio da Francesco Ariosto all’epoca moderna, «ATTI DELLA SOCIETÀ DEI NATURALISTI E MATEMATICI DI MODENA», 2019, 150, pp. 35 - 75 [Scientific article]
Anna Crivellari, Alessandro Tugnoli, Sarah Bonvicini, Anna Laura Garbetti, Valerio Cozzani, Paolo Macini,, Key Performance Indicators for Environmental Protection from Oil Spills During Offshore Oil & Gas Operations, in: Proceedings OMC19,Offshore Mediterranean Conference and Exhibition, 2019, pp. 1 - 9 (atti di: Offshore Mediterranean Conference and Exhibition, Ravenna, 27-29 March 2019) [Contribution to conference proceedings]
Cianella, Roberto; Ferrari, Marco; Macini, Paolo; Mesini, Ezio, Application and Evaluation of the 2013/30/EU Offshore Safety Directive in Italy, in: 2019 SPE Europec - 81 EAGE Conference papers, 2019, pp. 1 - 19 (atti di: SPE Europec featured at 81st EAGE Conference and Exhibition, London, 03-06 June 2019) [Contribution to conference proceedings]
Francesco Tinti, Kristina Strpic, Sara Kasmaee, Sara Focaccia, Emanuele Bedeschi, Andrea Verdecchia, Alberto Barbaresi, Paolo Macini, Performance comparison between a typical very shallow and an innovative configuration of ground heat exchangers, in: Proceedings European Geothermal Congress 2019, 2019, pp. 1 - 10 (atti di: European Geothermal Congress 2019, Den Haag, The Netherlands, 11-14 June 2019) [Contribution to conference proceedings]
Antonio Palermo, Farhad Zeighami, Athanasios Vratsikidis, Zhibao Cheng, Dimitris Pitilakis, Alessandro Marzani, Design of a medium-scale test for the assessment of a resonant seismic barrier within the ReWarD Project, in: Theoretical Approaches in Non-Linear Dynamical Systems, Lodz, Politechnika Łódzka 2019, 2019, pp. 393 - 404 (atti di: The 15th International Conference “Dynamical Systems - Theory and Applications”, Lodz, Poland, 2-5 Dicembre) [Contribution to conference proceedings]
Mesini Ezio; Mirri Domenico; Macini Paolo, Nascita e sviluppo dell'Ingegneria all'Università di Bologna, Bologna, Bononia University Press srl, 2019, pp. 952 . [Editorship]
Macini Paolo; Mesini Ezio, L’ingegneria mineraria all’università di Bologna, in: Nascita e sviluppo dell’ingegneria all’università di Bologna, Bologna, Bononia University Press s.r.l., 2019, pp. 621 - 639 [Chapter or essay]
Macini Paolo; Mesini Ezio, L’ingegneria per l’Ambiente e il Territorio, in: Nascita e sviluppo dell’ingegneria all’università di Bologna, Bologna, Bononia University Press s.r.l., 2019, pp. 834 - 843 [Chapter or essay]
Zonzini Federica; Luca De Marchi; Nicola Testoni; Alessandro Marzani, Direct Spread Spectrum Modulation and Dispersion Compensation for Guided Wave-based Communication Systems, in: 2019 IEEE International Ultrasonics Symposium (IUS), 2019, pp. 2500 - 2503 (atti di: 2019 IEEE International Ultrasonics Symposium (IUS), Glasgow, Scotland, October 6-9, 2019) [Contribution to conference proceedings]
de Miranda, S.; D'Altri, A. M.; Castellazzi, G., Modeling environmental ageing in masonry strengthened with composites, «ENGINEERING STRUCTURES», 2019, 201, pp. 1 - 15 [Scientific article] Open Access
D'Altri A.M.; Messali F.; Rots J.; Castellazzi G.; de Miranda S., A damaging block-based model for the analysis of the cyclic behaviour of full-scale masonry structures, «ENGINEERING FRACTURE MECHANICS», 2019, 209, pp. 423 - 448 [Scientific article] Open Access
Tarsi, G.; Mazzotta, F.; Sangiorgi, C., Rheo-mechanical analysis of bitumens produced with green binder extenders, in: Bituminous Mixtures and Pavements VII, Thessaloniki, A. F. Nikolaides, E. Manthos, 2019, pp. 81 - 87 (atti di: 7th International Conference 'Bituminous Mixtures and Pavements', Thessaloniki, 12-14 June 2019) [Contribution to conference proceedings]
Formentin, Sara Mizar; Zanuttigh, Barbara; Palma, Giuseppina; Gaeta,Maria Gabriella; Guerrero, Massimo, Experimental Analysis of the Wave Loads on Dike CrownWalls with Parapets., in: Coastal Structures 2019, 2019, pp. 200 - 210 (atti di: Coastal Structures Conference 2019, Hannover, 30 september - 2 October 2019) [Contribution to conference proceedings]
Bossi, G.; Borgatti, L.; Gottardi, G.; Marcato, G., Quantification of the uncertainty in the modelling of unstable slopes displaying marked soil heterogeneity, «LANDSLIDES», 2019, 16, pp. 2409 - 2420 [Scientific article]
Sara Mizar Formentin * , Maria Gabriella Gaeta , Giuseppina Palma, Barbara Zanuttigh, Massimo Guerrero, Flow Depths and Velocities across a Smooth Dike Crest, «WATER», 2019, 11, pp. 1 - 32 [Scientific article] Open Access
Petronici F.; Pujades E.; Jurado A.; Marcaccio M.; Borgatti L., Numerical modelling of the Mulino Delle Vene Aquifer (Northern Italy) as a tool for predicting the hydrogeological system behavior under different recharge conditions, «WATER», 2019, 11, pp. 1 - 25 [Scientific article] Open Access
Corsini A.; Borgatti L., Mountain landslides: Monitoring, modeling, and mitigation, ;Postfach, MDPI AG, 2019, pp. 1 . [Editorship]
Donati D.; Stead D.; Elmo D.; Borgatti L., A preliminary investigation on the role of brittle fracture in the kinematics of the 2014 san Leo landslide, «GEOSCIENCES», 2019, 9, pp. 1 - 31 [Scientific article] Open Access
Marchese F.; Rodani S.; Sciotti A.; Vagnozzi S.; Bernagozzi G.; Sciascia F.; Scuri A.; Piccinini L.; Borgatti L.; Benedetti G., A 3D numerical model for the evaluation of the tunneling water inflow: The fortezza – ponte gardena case study, in: Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art- Proceedings of the WTC 2019 ITA-AITES World Tunnel Congress, CRC Press/Balkema, 2019, pp. 962 - 971 (atti di: World Tunnel Congress, WTC 2019 and the 45th General Assembly of the International Tunnelling and Underground Space Association, ITA-AITES 2019, ita, 2019) [Contribution to conference proceedings]
Palma, Giuseppina; Formentin, SARA MIZAR; Contestabile, Pasquale; Zanuttigh, Barbara; Vicinanza, Diego, Wave loads on the OBREC device in a real wave climate, in: Proceedings of the 13th European Wave and Tidal Energy Conference, 2019, pp. 1791 - 1798 (atti di: European Wave and Tidal Energy Conference, Napoli, 1-6 Settembre 2019) [Contribution to conference proceedings]
Vittoria Laghi, Michele Palermo, Giada Gasparini, Valentina Alena Girelli, Tomaso Trombetti, Geometrical Characterization of Wire-and-Arc Additive Manufactured Steel Elements, «ADVANCED MATERIALS LETTERS», 2019, 10, pp. 695 - 699 [Scientific article] Open Access
Palermo, Michele; Gasparini, Giada; Silvestri, Stefano; Laghi, Vittoria; Trombetti, Tomaso, Il miglioramento sismico di una struttura ospedaliera mediante un sistema di dissipazione esterno di tipo MPD, in: Atti del XVIII Convegno ANIDIS 2019 - L'Ingegneria sismica in Italia, 2019, pp. 171 - 177 (atti di: XVIII Convegno ANIDIS 2019 - L'Ingegneria sismica in Italia, Ascoli Piceno, 15-19 Settembre 2019) [Contribution to conference proceedings]
Laghi, Vittoria; Palermo, Michele; Incerti, Andrea; Gasparini, Giada; Trombetti, Tomaso, Caratterizzazione sperimentale di una malta innovativa duttile per il miglioramento delle prestazioni sismiche di sistemi di muratura non rinforzata, in: Atti del XVIII Convegno ANIDIS 2019 - L'Ingegneria sismica in Italia, 2019, pp. 30 - 38 (atti di: XVIII Convegno ANIDIS 2019 - L'Ingegneria sismica in Italia, Ascoli Piceno, 15-19 Settembre 2019) [Contribution to conference proceedings]
Stefano Silvestri, Vittoria Laghi, Michele Palermo, Giada Gasparini, Tomaso Trombetti, Stima del rapporto di smorzamento per strutture a telaio con sistemi dissipativi mediante riduzione a sistema equivalente a singolo grado di libertà, in: Atti del XVIII Convegno ANIDIS 2019 - L'Ingegneria sismica in Italia, 2019, pp. 90 - 101 (atti di: XVIII Convegno ANIDIS 2019 - L'Ingegneria sismica in Italia, Ascoli Piceno, 15-19 Settembre 2019) [Contribution to conference proceedings]
Jonathan Manzi, Vittoria Laghi, Michele Palermo, Tomaso Trombetti, Mechanical characterization of Additive Manufactured stainless-steel structural elements through tensile tests and Digital Image Correlation, in: Atti del XXVII Congresso C.T.A., 2019, pp. 3 - 10 (atti di: XXVII Congresso C.T.A., Bologna, 3-5 Ottobre 2019) [Contribution to conference proceedings]
Palermo M.; Laghi V.; Silvestri S.; Gasparini G.; Trombetti T., Seismic design of frame structures equipped with innovative hysteretic dissipative devices, in: ISEC 2019 - 10th International Structural Engineering and Construction Conference, ISEC Press, 2019, pp. 1 - 6 (atti di: 10th International Structural Engineering and Construction Conference, ISEC 2019, usa, 2019) [Contribution to conference proceedings]
Laghi, V.; Palermo, M.; Gasparini, G.; Silvestri, S.; Trombetti, T., The application of weld-based additive manufacturing steel to structural engineering, in: ISEC 2019 - 10th International Structural Engineering and Construction Conference, ISEC Press, 2019, pp. 1 - 5 (atti di: 10th International Structural Engineering and Construction Conference, ISEC 2019, usa, 2019) [Contribution to conference proceedings]
Laghi V.; Palermo M.; Gasparini G.; Trombetti T., Optimization studies on diagrid columns realized with wire-and-arc additive manufacturing process, in: 20th Congress of IABSE, New York City 2019: The Evolving Metropolis - Report, International Association for Bridge and Structural Engineering (IABSE), 2019, pp. 177 - 181 (atti di: 20th IABSE Congress, New York City 2019: The Evolving Metropolis, usa, 2019) [Contribution to conference proceedings]
E. Şirin, S. Bondua', Economic and Environmental Optimization of Ornamental Stone Block Cutting with a 3D Algorithm, in: M. Yurdakul, H. Akda, E. Kundak, E. Yılmazkaya, PROCEEDINGS OF THE 10 th INTERNATIONAL MARBLE AND NATURAL STONES CONGRESS AND EXHIBITION OF TURKEY, ARALIK 2019 ANKARA, 2019, 10, pp. 216 - 225 (atti di: 10 th INTERNATIONAL MARBLE AND NATURAL STONES CONGRESS AND EXHIBITION OF TURKEY, BURSA, 13-14/12/2019) [Contribution to conference proceedings]
Lambertini Alessandro, Bitelli Gabriele, Mandanici Emanuele, Tini Maria Alessandra, Vittuari Luca, Integrazione di tecniche geomatiche per applicazioni di agricoltura di precisione nel progetto LIFE AGROWETLANDS II, in: Atti ASITA 2019, «ATTI CONFERENZA NAZIONALE ASITA», 2019, pp. 611 - 612 (atti di: 23 Conferenza Nazionale ASITA, Trieste, 12-14/11/2019) [Contribution to conference proceedings]
Francesco Prandi, Luca Guerrini, Stefano Cerini, Letterio Giannino, Daniele Caretti, Giovanni Mazzotti, Fiorenzo Parrinello, Fabrizio Pucci, Valentina Fiumi, Chiara Gualandi, Maurizio Fiorini, Low molecular weight compounds in polyolefins: a comparative study of different analytical techniques and processing conditions, in: Chemistry meets Industry & Society (CIS2019), 2019, pp. 288 - 288 (atti di: Chemistry meets Industry & Society (CIS2019), Salerno, August 28th-30th 2019) [Contribution to conference proceedings]
Montefalcone, M.; Vacchi, M.; Archetti, R.; Ardizzone, G.; Astruch, P.; Bianchi, C. N.; Calvo, S.; Criscoli, A.; Fernandez-Torquemada, Y.; Luzzu, F.; Misson, G.; Morri, C.; Pergent, G.; Tomasello, A.; Ferrari, M., Geospatial modelling and map analysis allowed measuring regression of the upper limit of Posidonia oceanica seagrass meadows under human pressure, «ESTUARINE, COASTAL AND SHELF SCIENCE», 2019, 217, pp. 148 - 157 [Scientific article]
Archetti, Renata; Damiani, Leonardo; Bianchini, Augusto; Romagnoli, Claudia; Abbiati, Marco; Addona, Fabio; Airoldi, Laura; Cantelli, Luigi; Gaeta, Gabriella; Guerrero, Massimo; Pellegrini, Marco; Saccani, Cesare; Barbanente, Angela; Saponieri, Alessandra; Simeone, Vincenzo; Tarantino, Eufemia; Francesca Bruno, Maria; Doglioni, Angelo; Motta Zanin, Giulia; Pratola, Luigi; Gianluca Molfetta, Matteo, Innovative Strategies, Monitoring and Analysis of the Coastal Erosion Risk: the STIMARE Project, in: The Proceedings of The Twenty-ninth (2019) International OCEAN AND POLAR ENGINEERING CONFERENCE, San Francisco, International Society of Offshore and Polar Engineers (ISOPE), 2019, pp. 3836 - 3844 (THE PROCEEDINGS OF THE ... INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE) [Chapter or essay]
Fusi, C.; Valli, A.; Lucisano, G.; Patruno, L.; de Miranda, S., Investigating the ceramic processes by numerical approaches, «FME TRANSACTIONS», 2019, 47, pp. 54 - 59 [Scientific article]
Battaglia, Lidia; Buratti, Nicola; Savoia, Marco, Seismic fragility assessment of masonry structural units and masonry aggregates, in: Patrick B. Dillon, Fernando S. Fonseca, Proceedings of the Thirteenth North American Masonry Conference (13NAMC), Longmont, The Masonry Society (TMS), 2019, 1, pp. 1487 - 1499 (atti di: Thirteenth North American Masonry Conference (13NAMC), Salt Lake City, 16-19 Giugno, 2019) [Contribution to conference proceedings]
Papalexiou, S. M.; Montanari, A., Global and Regional Increase of Precipitation Extremes Under Global Warming, «WATER RESOURCES RESEARCH», 2019, 55, pp. 4901 - 4914 [Scientific article]
Papacharalampous G.; Tyralis H.; Langousis A.; Jayawardena A.W.; Sivakumar B.; Mamassis N.; Montanari A.; Koutsoyiannis D., Probabilistic hydrological post-processing at scale: Why and how to apply machine-learning quantile regression algorithms, «WATER», 2019, 11, pp. 1 - 43 [Scientific article] Open Access
Carabba, Lorenza; Masi, Giulia; Pirskavwetz, S.; Kruger, S.; Gluth, Gjg; Bignozzi, Maria, Thermal properties and steel corrosion in light-weigth alkali activated mortars, in: Proceedings of the International Conference on Sustainable Materials, Systems and Structures (SMSS2019) New Generation of Construction Materials, Rovinj, RILEM Publications S.A.R.L., 2019, pp. 125 - 132 (atti di: International Conference on Sustainable Materials, Systems and Structures (SMSS 2019) New Generation of Construction Materials, Rovinj, Croazia, 20-22 marzo 2019) [Contribution to conference proceedings]
Carloni, Christian; Santandrea, Mattia; Baietti, Giulia, Influence of the width of the specimen on the fracture response of concrete notched beams, «ENGINEERING FRACTURE MECHANICS», 2019, 216, pp. 106465 - 106465 [Scientific article]
Foschi, Eleonora; Magrini, Chiara; Bonoli, Alessandra, The system thinking approach to boost the transition towards circular economy in packaging applications, in: Unknown, 2019(atti di: International Conference on Environmental Engineering and Management (ICEEM2019), Iasi, 18-21 Settembre 2019) [Poster]
Eleonora Foschi; Alessandra Bonoli, Scenario of the plastic waste recycling in Emilia Romagna Region (Italy) as effort for the recent European Strategy for plastics in a circular economy, in: Heraklion 2019 - Proceedings, 2019, pp. on line su sito web - on line su sito web (atti di: HERAKLION 2019 - 7th International Conference on Sustainable Solid Waste Management, Heraklion, 26-29 Giugno 2019) [Contribution to conference proceedings]
Chiara Magrini, Eleonora Foschi, Alessandra Bonoli, The role of eco-labelling in plastic packaging circularity, in: Circular economy. What are you doing? Posters, 2019(atti di: INTERNATIONAL SOLID WASTE ASSOCIATION (ISWA) WORLD CONGRESS 2019, Bilbao, 7-9 Ottobre 2019) [Poster]
Stefano Gandolfi, Luca Poluzzi, Luca Tavasci, L’uso di tecnologie GNSS a basso costo per applicazioni di monitoraggio e posizionamento di precisione (stato dell’arte e prospettive di impiego), in: ASITA, ASITA 2019, Milano, ASITA, 2019, pp. 535 - 536 (atti di: Conferenza ASITA 2019, Trieste, 12-14 novembre 2019) [Contribution to conference proceedings]
Maria Manzino, Ambrogio; Cina, Alberto; Gandolfi, Stefano, Prime analisi delle elaborazioni GNSS orarie del sito di Madonna del Sasso, in: ASITA, ASITA 2019, Milano, ASITA, 2019, pp. 701 - 708 (atti di: Conferenza ASITA 2019, Trieste, 12-14 novembre 2019) [Contribution to conference proceedings]
Margherita Aguzzi, Carlo Albertazzi, Nunzio De Nigris, Stefano Gandolfi, Maurizio Morelli, Luca Tavasci, Silvia Unguendoli, Enrica Vecchi, Intervento di ripascimento con sabbie sottomarine in Emilia-Romagna: metodi geomatici per il rilievo topografico e batimetrico e risultati del monitoraggio, in: ASITA, ASITA 2019, Milano, ASITA, 2019, pp. 9 - 16 (atti di: Conferenza ASITA 2019, Trieste, 12-14 novembre 2019) [Contribution to conference proceedings]
Tavasci, Luca; Cascarano, Pasquale; Poluzzi, Luca; Gandolfi, Stefano, Reti Neurali Ricorsive applicate a sistemi di monitoraggio GNSS in tempo reale, in: ASITA, ASITA 2019, Milano, ASITA, 2019, pp. 995 - 1000 (atti di: Conferenza ASITA 2019, Trieste, 12-14 novembre 2019) [Contribution to conference proceedings]
Guidotti G.; Soccio M.; Garcia-Gutierrez M.-C.; Gutierrez-Fernandez E.; Ezquerra T.A.; Siracusa V.; Munari A.; Lotti N., Evidence of a 2D-Ordered Structure in Biobased Poly(pentamethylene furanoate) Responsible for Its Outstanding Barrier and Mechanical Properties, «ACS SUSTAINABLE CHEMISTRY & ENGINEERING», 2019, 7, pp. 17863 - 17871 [Scientific article]
Bianchini A., Guzzini A., Pellegrini M., Saccani C., Gaeta M.G., Archetti R., Coastal erosion mitigation through ejector devices application, in: Proceedings of the 9th Short Course/Conference on Applied Coastal Research – Coastal zone strategies under climate change: engineering, geology, ecology, management and adaptation, Cosenza, EdiBios, 2019, pp. 13 - 18 (atti di: 9th Short Course/Conference on Applied Coastal Research – Coastal zone strategies under climate change: engineering, geology, ecology, management and adaptation, Bari, 9-11 Settembre 2019) [Contribution to conference proceedings]
Saccani, C.; Damiani, L.; Bianchini, A.; Pellegrini, M.; Guzzini, A.; Archetti, R.; Saponieri, A.; Bruno, M. F.; Nobile, B., The seabed maintenance through a jet-pump device: the case study of Rodi Garganico (South Italy), in: Proceedings of the 9th Short Course/Conference on Applied Coastal Research – Coastal zone strategies under climate change: engineering, geology, ecology, management and adaptation, Cosenza, EdiBios, 2019, pp. 25 - 30 (atti di: 9th Short Course/Conference on Applied Coastal Research – Coastal zone strategies under climate change: engineering, geology, ecology, management and adaptation, Bari, 9-11 Settembre 2019) [Contribution to conference proceedings]
Bonoli, A.; Zanni, S.; Awere, E., Organic waste composting and sustainability in low-income communities in Palestine: lessons from a pilot project in the village of Al Jalameh, Jenin, «INTERNATIONAL JOURNAL OF RECYCLING OF ORGANIC WASTE IN AGRICULTURE», 2019, 8, pp. 253 - 262 [Scientific article] Open Access
Ferretti E., Multiscale modeling of composite materials with DECM approach: Shape effect of inclusions, «INTERNATIONAL JOURNAL OF MECHANICS», 2019, 13, pp. 114 - 128 [Scientific article]
Incerti, Andrea; Ferretti, Francesca; Mazzotti, Claudio, FRCM strengthening systems efficiency on the shear behavior of pre-damaged masonry panels: an experimental study, «JOURNAL OF BUILDING PATHOLOGY AND REHABILITATION», 2019, 4, pp. 1 - 13 [Scientific article]
Ferretti F.; Incerti A.; Tilocca A.R.; Mazzotti C., Grout injection effect on the shear behavior of FRCM strengthened stone masonry panels, in: Key Engineering Materials, Trans Tech Publications Ltd, «KEY ENGINEERING MATERIALS», 2019, 817, pp. 552 - 559 (atti di: 6th International Conference on Mechanics of Masonry Structures Strengthened with Composite Materials, MuRiCo6 2019, Bologna, Italy, 2019) [Contribution to conference proceedings]
Chiara Magrini; Alessandra Bonoli, Life Cycle Thinking and waste prevention activities: the case of Emilia-Romagna region, in: Il Life Cycle Thinking a supporto delle strategie di mitigazione e adattamento ai cambiamenti climatici, ENEA - Agenzia nazionale per le nuove tecnologie, l'energia e lo sviluppo economico sostenibile, 2019, pp. 289 - 293 (atti di: XIII Convegno della Rete Italiana LCA -VIII Convegno dell'Associazione Rete Italiana LCA, Roma, 13-14 giugno 2019) [Contribution to conference proceedings]
Annalisa Trentin; Tomaso Trombetti, Riflessioni per un riuso della ex Manifattura Tabacchi, in: La Manifattura Tabacchi a Bologna. Ricerche sulla architettura industriale contemporanea tra storia, tecnica e riuso, Bologna, Bononia University Press, 2019, pp. 207 - 231 [Chapter or essay]
Crivellari A.; Cozzani V.; Dincer I., Design and energy analyses of alternative methanol production processes driven by hybrid renewable power at the offshore Thebaud platform, «ENERGY CONVERSION AND MANAGEMENT», 2019, 187, pp. 148 - 166 [Scientific article]
Crivellari A.; Cozzani V.; Dincer I., Exergetic and exergoeconomic analyses of novel methanol synthesis processes driven by offshore renewable energies, «ENERGY», 2019, 187, pp. 1 - 14 [Scientific article]
DEL PRETE, Clementina; Wan-Wendner, Roman; Buratti, Nicola; Mazzotti, Claudio, Lattice Discrete Particle Modeling of MSFRC material, in: Matteo Colombo, Marco di Prisco, Liberato Ferrara, SSCS19 Numerical Modeling Strategies for sustainable concrete structures, 2019, pp. 27 - 36 (atti di: SSCS19 Numerical Modeling Strategies for sustainable concrete structures, Lecco, 5-7 Settembre) [Contribution to conference proceedings]
Clementina Del Prete, Nicola Buratti, Claudio Mazzotti, Roman Wan-Wendner, Experimental investigation and numerical modelling of Macro-Synthetic fibre reinforced concrete materials, in: fib Proceedings, 2019, pp. 1 - 7 (atti di: Symposium on Concrete and Concrete Structures, Parma, 15 Ottobre) [Contribution to conference proceedings]
Del Prete, C.; Buratti, N.; Manzi, S.; Mazzotti, C., Macro synthetic fibre reinforced concrete: Influence of the matrix mix design on interfacial bond behavior, in: IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, 2019, 596, pp. 012 - 025 (atti di: 10th International Conference Fibre Concrete 2019, FRC 2019, Prague, 17-20, 2019) [Contribution to conference proceedings]
Chiapponi L.; Ungarish M.; Petrolo D.; Di Federico V.; Longo S., Non-Boussinesq gravity currents and surface waves generated by lock release in a circular-section channel: Theoretical and experimental investigation, «JOURNAL OF FLUID MECHANICS», 2019, 869, pp. 610 - 633 [Scientific article]
Felisa, G.; Lauriola, I.; Pedrazzoli, P.; Di Federico, V.; Ciriello, V., Sustainability analysis of alternative long-term management strategies for water supply systems: A case study in Reggio Emilia (Italy), «WATER», 2019, 11, pp. 1 - 26 [Scientific article] Open Access
Chiapponi L.; Ciriello V.; Longo S.; Di Federico V., Non-Newtonian Backflow in an Elastic Fracture, «WATER RESOURCES RESEARCH», 2019, 55, pp. 10144 - 10158 [Scientific article] Open Access
Lenci, A.; Di Federico, V., Shear-thinning fluid flow in variable aperture channels, in: Proceedings of 4th International Electronic Conference on Water Sciences, MDPI, 2019, pp. 1 - 7 (atti di: 4th International Electronic Conference on Water Sciences, online, 13-29 November 2019) [Contribution to conference proceedings]
Malatesta Michelangelo Maria; Testoni N.; De Marchi L.; Marzani A., Lamb waves Direction of Arrival estimation based on wavelet decomposition, in: IEEE International Ultrasonics Symposium, IUS, IEEE Computer Society, «IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM», 2019, 2019-, pp. 1616 - 1618 (atti di: 2019 IEEE International Ultrasonics Symposium, IUS 2019, gbr, 2019) [Contribution to conference proceedings]
Ricci Eleonora, Benedetti Francesco Maria, De Angelis Maria Grazia, The Role of Competitive Sorption in CO2/CH4 Separation with Membranes, in: Book of Abstract. Bridging Science with Technology: a Renaissance in Science, 2019(atti di: 12th European Congress of Chemical Engineering, Firenze, 15-19 September 2019) [Poster]
Zonzini, Federica; Malatesta, MICHELANGELO MARIA; Bogomolov, Denis; Testoni, Nicola; DE MARCHI, Luca; Marzani, Alessandro, A Spectral Peak-Picking Method for On-board Operational Modal Analysis of Multy-type Vibration-based SHM, in: ANCRiSST 2019 Procedia: 14th International Workshop on Advanced Smart Materials and Smart Structures Technology, 2019, pp. 61 - 64 (atti di: 14th International Workshop on Advanced Smart Materials and Smart Structures Technology, Roma, Italy, July 18-21) [Contribution to conference proceedings]
Ricci Eleonora, Di Maio Ernesto, Degli Esposti Micaela, Mensitieri Giuseppe, De Angelis Maria Grazia, Un Approccio Termodinamico per la Descrizione dell’Assorbimento di Gas in Acetati di Cellulosa, in: Book of Abstract. Il contributo dell'Ingegneria Chimica Italiana alla sostenibilità globale., 2019(atti di: Convegno GRICU 2019, Palermo, 30th June - 3rd July 2019) [Poster]
Ricci Eleonora, Benedetti Francesco Maria, De Angelis Maria Grazia, Assorbimento di Miscele di Gas in Polimeri a Microporosità Intrinseca (PIM) per la Separazione di Gas a Membrana, in: Book of Abstract. Il contributo dell'Ingegneria Chimica Italiana alla sostenibilità globale., 2019(atti di: Convegno GRICU 2019, Palermo, 30th June - 3rd July 2019) [Poster]
Ricci Eleonora, Vergadou Niki, Vogiatzis Georgios, De Angelis Maria Grazia, Theodorou Doros Nicolas, Simulazione Atomistica delle Proprietà Termodinamiche e di Trasporto del Sistema CO2-Polistirene, in: Book of Abstract. Il contributo dell'Ingegneria Chimica Italiana alla sostenibilità globale., 2019(atti di: Convegno GRICU 2019, Palermo, 30th June - 3rd July 2019) [Poster]
Alessandra Bonoli; Chiara Magrini; Alessandro Bazzani; Giorgia Chergia;, Urban waste management in Emilia-Romagna region: economic and technical evaluation in a life cycle perspective, in: Innovations & technologies in waste recovery, 2019, pp. 3 - 5 (atti di: 4th MatER Meeting, Piacenza, Italy, 27-29 Maggio 2019) [Abstract]
Alessandra Bonoli; Andrea Simone; Anna Degli Esposti; Chiara Magrini; Piergiorgio Tataranni;, Simbiosi industriale e progettazione di conglomerati bituminosi con materiale di riciclo, in: “Simbiosi industriale e progettazione di conglomerati bituminosi con materiale di riciclo”, 2019(atti di: Ecomondo, “Buone pratiche di simbiosi industriale in Italia e il contributo delle policy regionali quale leva strategica”, Rimini, 7/11/2019) [Poster]
Franco L.; Pozza L.; Saetta A.; Savoia M.; Talledo D., Strategies for structural modelling of CLT panels under cyclic loading conditions, «ENGINEERING STRUCTURES», 2019, 198, pp. 1 - 19 [Scientific article]
Bellini A.; Shahreza S.K.; Mazzotti C., Cyclic bond behavior of FRCM composites applied on masonry substrate, «COMPOSITES. PART B, ENGINEERING», 2019, 169, pp. 189 - 199 [Scientific article] Open Access
Bellini A.; Bovo M.; Incerti A.; Mazzotti C., An alternative approach for frcm matrix tensile strength evaluation, in: Key Engineering Materials, Trans Tech Publications Ltd, «KEY ENGINEERING MATERIALS», 2019, 817, pp. 365 - 370 (atti di: 6th International Conference on Mechanics of Masonry Structures Strengthened with Composite Materials, MuRiCo6 2019, Bologna, Italy, 2019) [Contribution to conference proceedings]
Tilocca A.R.; Incerti A.; Bellini A.; Savoia M., Influence of matrix properties on FRCM-CRM strengthening systems, in: Key Engineering Materials, Trans Tech Publications Ltd, «KEY ENGINEERING MATERIALS», 2019, 817, pp. 478 - 485 (atti di: 6th International Conference on Mechanics of Masonry Structures Strengthened with Composite Materials, MuRiCo6 2019, Bologna, Italy, 2019) [Contribution to conference proceedings]